How To Install The Bathroom Vanity

1. Main cabinet installation method
A. wall-mounted bathroom main cabinet installation method: first check whether the wall is solid (otherwise use floor-to-ceiling type), according to the selected hole, use a percussion drill to punch holes on the wall (83cm from the ground after installation), plug the wall-mounted accessories into the hole, and then lock the cabinet with the cover with self-tapping screws, and can also be installed with expansion screws. After the cabinet is installed, align the countertop basin with the wooden bamboo of the chess board and adjust it to be flat.
B. Floor-standing bathroom cabinet installation method: the cabinet body is placed horizontally, the cabinet limb assembly is screwed on the fixing piece through the double-ended screw, and then the cabinet is placed in an appropriate position, and the cabinet foot is leaning on the outer template as much as possible to balance the force of the cabinet. And adjust to the level by the anchor screw. When arranging, see if the four feet are stable. If it is not on the same horizontal line, the cabinet body is stressed unevenly and the lines are distorted, which not only affects the appearance, but also affects the service life.

2. Bath mirror installation method
A. Measure the size of the mirror with a tape measure, then punch holes in the wall and install the wall plug in the appropriate position according to the installation specifications, and then screw the screws into the wall plug to the appropriate depth.
B. According to the two holes on the back of the mirror, insert them into the self-tapping screws on the wall. Newspaper is ideal for lens wiping.

3. Precautions and maintenance
A. Keep the bathroom well ventilated and the cabinet dry to prolong the service life. Avoid drenching water, if there are water droplets, it should be wiped dry with a cloth in time.
B. Please do not contact the cabinet mirror with the ground when assembling, and should be padded with soft objects to avoid injury.
C. During the assembly process, pay attention to prevent screwdrivers and other metal objects from shortening the surface of the plate.
D. When cleaning the cabinet, the detergent of the cabinet is best to use neutral reagents, such as: wipe with toothpaste, wipe with a soft cloth, it is also a simple maintenance method.
E. Always have some liquid wax for furniture, easy to wipe, use a soft cloth when cleaning, and do not use metal wires, scouring pads, and strong chemicals to scrub.
F. When storing cleaning supplies in the cabinet, it is best to put a layer of plastic mat or small square towel underneath that is easy to clean.
G. Try to keep the dry and wet separation of the space to prevent water from remaining on the cabinet for a long time.